View MKP3384X2_4167686.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

BCcomponents
DATA SHEET
MKP 338 4 X2 Interference suppression film capacitors
Product Specification NEW File under BCcomponents, BC05 2001 Jun 22
BCcomponents
Product Specification
Interference suppression film capacitors
MKP RADIAL POTTED TYPE
MKP 338 4 X2
PITCH 15/22.5/27.5/37.5/55 mm
296x12(full_width)
CBB258
Fig.1 Simplified outlines.
FEATURES
QUICK REFERENCE DATA(1) DESCRIPTION Capacitance range (E12 series) Capacitance tolerance Rated (AC) voltage, 50 to 60 Hz Rated (DC) voltage Climatic category Rated temperature Maximum application temperature Reference specifications Safety approvals: Materials Safety class Note 1. Under development. 0.01 to 10 F VALUE
* 15 to 55 mm lead pitch * Supplied loose in box * Consists of a low-inductive wound cell of metallized polypropylene film, potted in a flame-retardant case * Fixed and insulated leads.
APPLICATIONS
20%; 10%
300 V 630 V 55/105/56/B 105 C 105 C IEC 60384-14 2nd edition and EN 132400 ENEC; UL1283 and CSA-C22.2 No.8 qualified in accordance with UL94V-O X2; across the line
* For X2 electromagnetic interference suppression * Specially designed to meet the requirements of the "IEC 60384-14 2nd edition and EN 132400", requiring a 2.5 kV peak pulse voltage test, and the UL1283 specifications.
DETAIL SPECIFICATION For more detailed data and test requirements see "Type detail specification HQN-384-14/120".
2001 Jun 22
2
BCcomponents
Product Specification
Interference suppression film capacitors
SAFETY APPROVALS AND SAFETY TEST REPORT Approvals SAFETY APPROVALS (X2)
R
MKP 338 4 X2
VOLTAGE 300 V (AC) 300 V (AC)
VALUE 10 nF to 10 F 10 nF to 10 F pending pending
FILE NUMBERS
UL1283 and CSA-C22.2 No.8
02
EN132400
Safety test report SAFETY TEST REPORT CB TEST CERTIFICATE VOLTAGE 300 V (AC) VALUE 10 nF to 10 F: 55/105/56/B FILE NUMBERS pending
The Enec-approval together with the CB-Certificate replace all national approval marks of the following countries (they have already signed the ENEC-Agreement): Austria; Belgium; Czech. Republic; Denmark; Finland; France; Germany; Greece; Hungary; Ireland; Italy; Luxembourg; Netherlands; Norway, Portugal; Slovenian; Spain; Sweden; Switzerland and United Kingdom.
2001 Jun 22
3
BCcomponents
Product Specification
Interference suppression film capacitors
COMPOSITION OF CATALOGUE NUMBER TYPE AND PITCHES 7.5 mm (bent back) 15.0 mm 338 4 22.5 mm 27.5 mm 37.5 mm 55.0 mm CAPACITANCE (numerically)
MKP 338 4 X2
MULTIPLIER (nF) 1 10 100 1000 3 4 5 6
X2
Example: 104 = 10 x 10 = 100 nF
2222
338
4.
XX X
TYPE 338 4
PACKAGING loose in box taped
LEAD CONFIGURATION lead length 3.5 mm lead length 5.0 mm lead length 25.0 mm 15.0 mm bent back to 7.5 mm insulated leads stranded Cu-wire 0.5 mm2 for 37.5 and 55 mm pitch lead length 3.5 mm
C-TOL PREFERRED TYPES 44 40 41 4. ON REQUEST
X2
20%
20%
4. 45 42 43 4. 4.
338 4
loose in box
lead length 5.0 mm lead length 25.0 mm insulated leads stranded Cu-wire 0.5 for 37.5 and 55 mm pitch mm2
X2
taped
10%
15.0 mm bent back to 7.5 mm
2001 Jun 22
4
BCcomponents
Product Specification
Interference suppression film capacitors
MKP 338 GENERAL DATA
MKP 338 4 X2
PITCH 15/22.5/27.5 mm PITCH 7.5 mm (bent back leads)
296x12(full_width)
l
b
l
b
h
h h'
lt P Odt 10
F' (1) F H Odt
15
Dimensions in mm. (1) F - F' < 0.3 mm F = 7.5 +0.6/-0.1 mm
CBA750
Fig.3 Outline.
Specific reference data for the 300 V AC (X2) capacitors DESCRIPTION Tangent of loss angle: C 470 nF 470 nF < C 1 F 1 F < C 3.3 F Rated voltage pulse slope (dU/dt)R at 420 V (DC) R between leads, for C 0.33 F at 100 V; 1 minute RC between leads, for C > 0.33 F at 100 V; 1 minute R between leads and case; 100 V; 1 minute Withstanding (DC)voltage (cut off current 10 mA); rise time 100 V/s: C 1F 1 F < C 3.3 F Withstanding (AC) voltage between leads and case Available 300 V AC (X2) versions PACKAGING(1) DIMENSIONS lead length 3.5 mm Loose in box lead length 5.0 mm lead length 25.0 mm Taped Notes 1. Taped on reel pitch = 27.5 mm is not available. 2. Other dimensions for 10% tolerance values. 2001 Jun 22 5 15.0 mm bent back to 7.5 mm C-tol FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 338 44... 2222 338 45...; note 2 2222 338 40... 2222 338 42...; note 2 2222 338 41... 2222 338 43...; note 2 2222 338 4.... 2222 338 4....; note 2 ORDERING preferred on request preferred on request preferred on request preferred on request at 1 kHz 10 x 10-4 20 x 10-4 30 x 10-4 VALUE at 10 kHz 20 x 10-4 70 x 10-4 - 100 V/s >15000 M >5000 s >30000 M 2200 V; 1 minute 1850 V; 1 minute 2200 V; 1 minute at 100 kHz 100 x 10-4 - -
20% 10% 20% 10% 20% 10% 20% 10%
BCcomponents
Product Specification
Interference suppression film capacitors
URac = 300 V (X2); URdc = 630 V
MKP 338 4 X2
loose and taped
CATALOGUE NUMBER LOOSE IN BOX C(1) (F) DIMENSIONS(2) bxhxl (mm) MASS (g) lt = 3.5 0.3mm lt = 5.0 0.3mm lt = 25.0 2.0mm C-tol = 20% catalogue number Pitch = 15.0 0.4 mm; dt = 0.60 0.06 mm 0.01 0.015 0.022 0.033 0.047 0.068 0.1 6.0 x 12.0 (14.0) x 17.5 1.4 Pitch = 15.0 0.4 mm; dt = 0.80 0.08 mm 0.15 0.22 0.33 7.0 x 13.5 (15.5) x 17.5 8.5 x 15.0 (17.0) x 17.5 10.0 x 16.5 (18.5) x 17.5 1.9 2.6 3.1 2222 338 44154 2222 338 44224 2222 338 44334 .. 40154 .. 40224 .. 40334 .. 41154 .. 41224 .. 41334 5.0 x 11.0 (13.0) x 17.5 1.2 2222 338 44103 2222 338 44153 2222 338 44223 2222 338 44333 2222 338 44473 2222 338 44683 2222 338 44104 .. 40103 .. 40153 .. 40223 .. 40333 .. 40473 .. 40683 .. 40104 .. 41103 .. 41153 .. 41223 .. 41333 .. 41473 .. 41683 .. 41104 last 5 digits last 5 digits last 5 digits pitch = 7.5 mm (bent back) .. 48001 .. 48002 .. 48003 .. 48004 .. 48005 .. 48006 .. 48007 pitch = 7.5 mm (bent back) .. 48008 .. 48009 .. 48011 pitch = 7.5 mm (bent back) 2222 338 44474 2222 338 44684 2222 338 44105 .. 40474 .. 40684 .. 40105 .. 41474 .. 41684 .. 41105 pitch = 7.5 mm (bent back) 2222 338 44155 2222 338 44225 2222 338 44335 .. 40155 .. 40225 .. 40335 .. 41155 .. 41225 .. 41335 not available not available REEL H = 16.0 mm; P0 = 15.0 mm
Pitch = 22.5 0.4 mm; dt = 0.80 0.08 mm 0.47 0.68 1.0 8.5 x 18.0 x 26.0 10.0 x 19.5 x 26.0 12.0 x 22.0 x 26.0 4.5 5.5 7.8
Pitch = 27.5 0.4 mm; dt = 0.80 0.08 mm 1.5 2.2 3.3 Notes 1. Under development. 2. Dimensions in brackets for bent back leads. 15.0 x 25.0 x 31.0 18.0 x 28.0 x 31.0 21.0 x 31.0 x 31.0 12.8 17.2 20.4
2001 Jun 22
6
BCcomponents
Product Specification
Interference suppression film capacitors
MKP GENERAL DATA
MKP 338 4 X2
PITCH 37.5/55 mm
296x12(full_width)
l
b
h
lt P Odt
CBA196
Fig.4 Outline. Specific reference data for the 300 V AC (X2) capacitors DESCRIPTION Tangent of loss angle 2.2 F < C 4.7 F 4.7 F < C 10 F Rated voltage pulse slope (dU/dt)R at 420 V (DC) RC between leads at 100 V; 1 minute R between leads and case; 100 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (AC) voltage between leads and case Available 300 V AC (X2) versions PACKAGING DIMENSIONS lead length 5.0 mm; note 1 Loose in box lead length 25.0 mm; note 1 insulated leads stranded Cu-wire 0.5 mm2 for 37.5 and 55 mm pitch Notes 1. Lead length 3.5 mm for pitch = 37.5 and 55 mm is not availible. 2. Other dimensions for 10% tolerance values. C-tol FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 338 40... 2222 338 42...; note 2 2222 338 41... 2222 338 43...; note 2 2222 338 4.... 2222 338 4....; note 2 ORDERING preferred on request preferred on request on request on request VALUE at 1 kHz
50 x 10-4 100 x 10-4
100 V/s
>5000 s >30000 M
1400 V; 1 minute 2200 V; 1 minute
20% 10% 20% 10% 20% 10%
2001 Jun 22
7
BCcomponents
Product Specification
Interference suppression film capacitors
URac = 300 V (X2); URdc = 630 V
MKP 338 4 X2
loose
CATALOGUE NUMBER C(1) (F) DIMENSIONS bxhxl (mm) LOOSE IN BOX MASS (g) lt = 5.0 1.0 mm C-tol = 20% catalogue number Pitch = 37.5 0.7 mm; dt = 1.0 0.1 mm 4.7 6.8 18.0 x 35.0 x 42.0 21.0 x 38.0 x 42.0 21.0 x 38.0 x 59.5 30.0 35.0 2222 338 40475 2222 338 40685 ... 41475 ... 41685 last 5 digits lt = 25.0 2.0 mm
Pitch = 55.0 1.0 mm; dt = 1.0 0.1 mm 10.0 Note 1. Under development. 50.0 2222 338 40106 ... 41106
2001 Jun 22
8
BCcomponents
Product Specification
Interference suppression film capacitors
CONSTRUCTION Description
MKP 338 4 X2
SPECIFIC METHOD OF MOUNTING TO WITHSTAND VIBRATION
AND SHOCK
* Low-inductive wound cell of metallized polypropylene (PP) film, potted with epoxy resin (for original pitch 27.5 mm) and polyurethane and epoxy resin (for pitch >27.5 mm) in a flame-retardant case * Radial leads, solder-coated * Small stand-off pips allow removal of solder flux etc. during cleaning of the printed-circuit board * Radial insulated leads; stranded Cu-wire with PVC isolation for pitch >27.5 mm on request
In order to withstand vibration and shock tests, it must be ensured that the stand-off pips are in good contact with the printed-circuit board:
* For pitches 15 mm capacitors shall be mechanically fixed by the leads. * For larger pitches the capacitors shall be mounted in the same way and the body clamped.
SPACE REQUIREMENTS ON PRINTED-CIRCUIT BOARD The maximum length and width of film capacitors is shown in Fig.6:
* Eccentricity as in Fig.6. The maximum eccentricity is smaller than or equal to the lead diameter of the product concerned.
144x12(halfpage) MKP metallized polypropylene film
* Product height with seating plane as given by "IEC 60717" as reference: hmax h + mm or hmax h' + mm.
144x12(halfpage) bmax = b + mm metal spray layer connecting wire
CBA198
eccentricity lmax = l + mm
CBB181
(1) = 0.3 mm for P 27.5 mm. = 1.0 mm for P > 27.5 mm.
Fig.6 Lay-out. Fig.5 Construction. Storage temperature Mounting NORMAL USE The capacitors are designed for mounting on printed-circuit boards. The capacitors packed in bandoliers are designed for mounting on printed-circuit boards by means of automatic insertion machines. For detailed tape specifications refer to this handbook, chapter "Packaging information".
* Storage temperature: Tstg = -25 to +40 C with RH maximum 80% without condensation.
RATINGS AND CHARACTERISTICS REFERENCE CONDITIONS Unless otherwise specified, all electrical values apply to an ambient temperature of 23 1 C, an atmospheric pressure of 86 to 106 kPa and a relative humidity of 50 2%. For reference testing, a conditioning period shall be applied over 96 4 hours by heating the products in a circulating air oven at the rated temperature and a relative humidity not exceeding 20%.
2001 Jun 22
9
BCcomponents
Product Specification
Interference suppression film capacitors
CHARACTERISTICS Capacitance
MKP 338 4 X2
CBA505
296x12(full_width) 4 C/C (%) 2 typical
0
max. -2
-4
min. -6 -50 0 50 Tamb (C) 100
Fig.7 Capacitance change at 1 kHz as a function of temperature. Tangent of loss angle
CBB177
296x12(full_width) 10 3 dissipation factor (x 10-4)
10 2
C
>2
.2
F
F 1
220
nF
2
.2
F
1F
47 n
F<
C
220
nF
10 1
nF 47 F10 0 10 1
10 2
10 3
10 4
f (Hz)
10 5
Fig.8 Tangent of loss angle as a function of frequency: typical curves.
2001 Jun 22
10
BCcomponents
Product Specification
Interference suppression film capacitors
Impedance
MKP 338 4 X2
296x12(full_width) 10 3 Impedance () 10 2
CBB185
10 n F
10 1
47 n F 100 nF
470 nF 100 0 nF
10 0
470 0n F 10 F
10-1
10-2 10 4
10 5
10 6
10 7
f (Hz)
10 8
Fig.9 Impedance as a function of frequency: typical curves. Resonant frequency
2 296x12(full_width) 10
CBB248
f (MHz)
10 1
10 0
X2
10
-1
1nF
10 nF
100 nF
1000 nF
C (nF)
10 F
Fig.10 Resonant frequency as a function of capacitance: typical curve.
2001 Jun 22
11
BCcomponents
Product Specification
Interference suppression film capacitors
MKP 338 4 X2
Maximum RMS voltage and AC current (sinewave) as a function of frequency for Tamb 105 C
CBB187
296x12(full_width) 10 3 AC voltage (V)
10 2
10 1 10 1
10 2
10 3
10 4
f (Hz)
10 5
Fig.11 AC voltage (RMS value) as a function of frequency at Tamb 105 C.
296x12(full_width) 10 4 AC current (mA) 10 3
CBB319
10000 nF 4700 nF
1000 nF 470 nF
10 2
100 nF 47 nF
10
1
10 nF
10 0
10 -1 10 1
10 2
10 3
10 4
f (Hz)
10 5
Fig.12 AC current (RMS value) as a function of frequency at Tamb 105 C.
2001 Jun 22
12
BCcomponents
Product Specification
Interference suppression film capacitors
Insulation resistance
MKP 338 4 X2
296x12(full_width) 10 6 RC (s)
CBA204
10 5
10 4 0 20 40 60 80 Tamb(C) 100
Fig.13 RC product as a function of ambient free air temperature: typical curve.
APPLICATION NOTES
* For X2 electromagnetic interference suppression in across the line applications (50/60 Hz) with a maximum mains voltage of 300 V (AC) 10% instability. * These capacitors are not intended for continuous pulse applications. For these situations, capacitors of the AC and pulse program must be used, such as: 2222 375 .....; 2222 383 ..... or 2222 479 ..... * The maximum ambient temperature must not exceed 105 C. * Rated voltage pulse slope:
- If the pulse voltage is lower than the rated voltage, the values of the specific reference data can be multiplied by 420 V (DC) and divided by the applied voltage.
2001 Jun 22
13
BCcomponents
Product Specification
Interference suppression film capacitors
MARKING Product marking The capacitors are marked (see Figs 14 to 15) with the following information: 1. Rated capacitance code in accordance with "IEC 60062" 2. Tolerance on rated capacitance; M = 20%; K = 10% 3. Rated (AC) voltage (e.g. 300 V) 4. Sub-class (e.g. X2) 5. Manufacturer's type designation (e.g. 338 4) 6. Code for dielectric material (MKP) 7. Manufacturer and origin (" " Belgium; "PL" Poland) 8. Year and week of manufacture (e.g. 0133).
CBB292
MKP 338 4 X2
HEAD FACE 144x12(halfpage)
FRONT FACE
100n M 338 4
MKP
BC 0133
300V~
X2
02
R
Fig.14 Example of marking for a capacitor with original pitch = 15 mm.
HEAD FACE
144x12(halfpage) 10 M 300V~ 338 4 MKP 02 BC 0133 X2
R
CBB293
Fig.15 Example of marking for a capacitor with original pitch 22.5 mm.
2001 Jun 22
14
BCcomponents
Product Specification
Interference suppression film capacitors
Package marking The package containing the capacitors is marked as shown Fig.16.
MKP 338 4 X2
Barcode label marking LINE 1 2 3 4 5 6 7 MARKING EXPLANATION Manufacturer's name Country of origin Sub-family Type description and sub class Capacitance value, tolerance, voltage and climatic category ("IEC 60068-1") Safety approvals Preference origin code: B Country of origin in code: 780 (Poland) Responsible production centre: PL Work order: WO Product type description Quantity and production period, year and week code Product code (12NC)
8 9 10
Fig.16 Barcode label.
2001 Jun 22
15
BCcomponents
Product Specification
Interference suppression film capacitors
QUICK REFERENCE TEST REQUIREMENTS TEST Robustness of leads Tensile strength: "IEC 60068-2-21" Bending: "IEC 60068-2-21" Resistance to soldering heat: "IEC 60068-2-20" load 10 N; 10 s load 5 N; 4 x 90 solder bath: 260 C; 10 s PROCEDURE (quick reference)
MKP 338 4 X2
REQUIREMENTS
no visible damage legible marking
|C/C| 5% tan 80 x 10-4 (C 1 F); note 1 tan 50 x 10-4 (C > 1 F); note 1
Component solvent resistance isopropyl alcohol; 23 C; 5 minutes Robustness of component (fixed leads only) Rapid change of temperature: 5 cycles "IEC 60068-2-14" 1 cycle = 30 minutes at -55 C and 30 minutes at 105 C Vibration: "IEC 60068-2-6" Shock: "IEC 60068-2-27" Climatic sequence Dry heat: "IEC 60068-2-2" Damp heat, cyclic, test Db, first cycle: "IEC 60068-2-30" Cold: "IEC 60068-2-1" Damp heat, cyclic, test Db, remaining cycles: "IEC 60068-2-30" Voltage proof: "IEC 60384-14" Other applicable tests Damp heat, steady state: "IEC 60068-2-3" 56 days; 40 C; 90 to 95% RH no load Vp = 1290 V (DC); 1 minute Vp = 1290 V (DC); 1 minute 2 hours; -55 C 16 hours; 105 C 10 to 55 Hz; amplitude 0.75 mm; 6 hours half sinewave; 490 m/s2; 11 ms
|C/C| 5% tan 80 x 10-4 (C 1 F); note 1 tan 50 x 10-4 (C > 1 F); note 1
|C/C| 5% tan 80 x 10-4 (C 1 F); note 1 tan 50 x 10-4 (C > 1 F); note 1
Rins 50% of specified value
|C/C| 5% tan 80 x 10-4 (C 1 F); note 1 tan 50 x 10-4 (C > 1 F); note 1
Rins 50% of specified value
Endurance (AC): "IEC 60384-14"
3 x 2.5 kV pulse voltage for X2; 1000 hours; 1.25 x URac at 105 C; once per hour; 0.1 s; 1000 V (RMS) via resistor of 47 ; Vp = 1290 V (DC); 1 minute
|C/C| 10% tan 80 x 10-4 (C 1 F); note 1 tan 50 x 10-4 (C > 1 F); note 1
Rins 50% of specified value
2001 Jun 22
16
BCcomponents
Product Specification
Interference suppression film capacitors
MKP 338 4 X2
TEST Charge and discharge: "IEC 60384-14"
PROCEDURE (quick reference) 10000 cycles; 5 ms; 1.5 x dV/dt
REQUIREMENTS
|C/C| 10% tan 80 x 10-4 (C 1 F); note 1 tan 50 x 10-4 (C > 1 F); note 1
Rins 50% of specified value
Passive flammability: "IEC 60384-14" Active flammability: "IEC 60384-14" Heat storage: "IEC 60384-14" Resistance to soldering heat with preheating: "IEC 60384-14" Active flammability test
class B 20 x 2.5 kV discharge 1000 hours; 105 C
no burning no burning
|C/C| 5% tan 80 x 10-4 (C 1 F); note 1 tan 50 x 10-4 (C > 1 F); note 1
preheating: 105 C; solder bath: 260 C; 10 s voltage proof up to 2 x peak impulse voltage of 4.13 or until breakdown (100 V/sec, current limited 2mA) failed capacitors connected to a 300 V (AC) power supply during 5 minutes.
|C/C| 5% tan 80 x 10-4 (C 1 F); note 1 tan 50 x 10-4 (C > 1 F); note 1
no burning
Note 1. Measuring frequency 10 kHz for C 1 F and 1 kHz for C > 1 F.
2001 Jun 22
17

▲Up To Search▲

Price & Availability of MKP3384X2

	To Download MKP3384X2 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .